阿肯色大学用激光粉末床熔融无粘结剂烧结月壤,打印出互锁建筑砌块

Date:2026-11-20 08:31:46

Researchers at the University of Arkansas have 3D printed interlocking building blocks from lunar regolith simulant without a binder, sintering the powder directly through laser powder bed fusion.

 

The work was published in the journal NPJ Advanced Manufacturing, and targeted construction on the Moon using material already on its surface, which could cut the amount of cargo NASA would need to send from Earth.

 

Earlier efforts to 3D print with lunar regolith relied on binding agents, which would have to be carried from Earth. The university says the team was the first to show that regolith simulant could be sintered directly, without a binder, into reconfigurable building blocks using a relatively low-power light source.

 

“There’s nothing else it’s binding to. The regolith powder is binding to itself,” said Cole McCallum, an undergraduate at the University of Arkansas at the time, and first author of the research study.

 

The experiments used Lunar Highlands Regolith Simulant (LHS-1), a commercially available material formulated to mimic samples collected during the Apollo missions. 

 

The blocks measured a few centimeters wide and were printed in two shapes, a cross and an H, that fitted together to form larger structures. The pure-regolith parts were more porous and structurally weaker than objects printed with binders.

 

“These structures we’re making can be self-supported,” McCallum said. “But I would be hesitant to say our process could be used for something that’s supporting other loads at this moment yet.”

 

Wan Shou, Assistant Professor of Mechanical Engineering at the University of Arkansas, and senior author of the study, said further research was needed to understand how the process behaved in microgravity and vacuum. What was clear was that the mechanical performance of the bricks had to improve before they were of practical use.

 

McCallum began working in Shou’s lab early in his undergraduate studies. “He had this really strong belief that undergrads should get involved more with research,” said McCallum, who graduated in May with degrees in mechanical engineering and physics. As an inaugural Lafayette Fellow, he went on to study aerospace engineering at the Institut Supérieur de l’Aéronautique et de l’Espace (ISAE-SUPAERO) in Toulouse, France.

0.043402s